Description
IMPORTANT! This set allows you to build CHAOS CULTIST CHAN CUTNBLAST.
The man Cultist Chan has just shot is still deciding which way to fall, and she is already celebrating. Her pistol is thrown up at the sky, her grin shows every one of her sharp little teeth, and one foot has kicked up behind her the way it does for girls being kissed at the end of old romance films, even though nobody has kissed her. She is simply happy, with the pure and uncomplicated happiness that only a close-range gunshot on a sunny afternoon can give her.
People meeting her for the first time usually ask why a Chaos warband would put up with a cultist like this, a small and grubby girl who always smells of bacon and has never followed an order in her life. The answer is that the Dark Powers, who have not agreed on anything since the beginning of time, have each blessed her separately without telling the others, so nobody with any sense lays a finger on her. The last High Priest who tried to give her an order spent eleven days in the latrines, and his replacement has decided it is safer to pretend she does not exist.
What really drives her superiors to despair is her attitude to sacred things, which she treats the way a child treats toys the day after a birthday. She has carried weapons that warlords would kill for, and she has thrown every one of them away the moment it stopped being fun. The relic hammer that a god forged for his favorite champion, which no other hand in the galaxy can lift, is still standing in the mud where she dropped it halfway through a battle, and the warriors who spent years trying to get it back are now camped around it, slowly turning their camp into a town. The Ork war-guitar that set whole armies on fire went to the first grot who asked for it, although somebody still leaves an Ork-sized guitar pick outside her tent every morning. Her old chain-blade is probably still running in a ditch somewhere.
In place of all that, she now carries a blade no sane smith would admit to making. Who puts spikes on the sides of a blade, where they can never touch anything? Somebody did, and the result looks wrong in the same way that a cup with its handle on the inside looks wrong. She, of course, adores it more than anything she has ever owned. She picked it out of a scrap heap because it matched her boots, and she polishes every spike before bed, so it is probably fairer to call it an accessory than a weapon, chosen the way other girls choose a new handbag. Her other hand holds an ugly little pistol that cost less than a meal, and she uses it with far more joy than she ever showed a holy relic.
There is nothing about her that can be predicted, and her warband stopped trying long ago. She has changed sides in the middle of a battle and changed back before anyone noticed, surrendered to an enemy patrol because she liked their hats and walked out two days later wearing all of them, and slept through an orbital bombardment with her head on a dead man’s backpack. The only two things that have ever held her attention for longer than an afternoon are violence and sex, which she chases with an enthusiasm that makes even the Renegades of Excess a little nervous, and even those are not safe from her boredom. Every so often, in the middle of a massacre or somewhere much less public, she just loses interest, sits down and starts drawing little hearts in the mud with the tip of her blade, and nobody can do anything except wait until something catches her eye again.
On the table she can lead a Chaos warband, hold an objective very badly, or just be the happiest thing in your whole army, and she is far more fun to paint than anyone whose life is in order.
HQ resin miniatures in heroic scale with 32mm base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).
WE NEVER COMPROMISE ON QUALITY
– 14k ultra-high resolution 3D printing with the market-top printers guarantees the highest possible print quality for today;
– The best UV printing resin maximizes the survival of models even after falling off the table;
– Careful manual parts positioning by our experienced specialists provide sharp printing with a minimum of the supports and makes post-processing fun and easy;
Preparation & assembly
PREPARATION
1. Check
Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us at [email protected].
2. Supports & touchpoints
We sell our 3D printed models without any major supports, but you should remove small touchpoints and ultra-tiny supports left on the model.
Please use a model knife and fine sandpaper.
Don’t be intimidated by the process, we use a top-quality UV printing resin and it is very easy to work with.
3. Warped Parts and Repositioning
Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.
We’re proud to be partners of Yes, That’s 3D Printed! – check them out! We use their high-quality WARGAMER resin because it’s almost as good as plastic and delivers incredible detail and durability, perfectly matching the capabilities of our 14K resolution printers.
Shipping, customs & returns
We don’t collect any taxes or fees (except for the US tariffs, and new EU taxes) on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.
Please note that customers are responsible for clearing customs and receiving their package in their country. If a package is returned to us as “unclaimed” or due to unpaid customs fees, we cannot refund the original shipping costs.
If you would like the package to be resent, we kindly ask that you cover the shipping fees again.
Compatibility & compliance
This product is an original design created for hobby use and display.
It should not be considered compatible with any existing game system or brand.
It is not affiliated with any game company, and is not intended or described as compatible with any specific ruleset.
Adult collectible miniature. Not a toy. Not intended for children under 14. Unpainted resin display model for hobby collectors. Contains small parts.

Reviews
There are no reviews yet.