IMPERIAL PLAGUE DOCTOR

$14.99

– 40k Heroic scale
– 2 head options
– 2 weapon options
– 25mm Scenic base
 

SKU: WGX_11001507 Categories: ,

Description

 


 IMPORTANT! This set allows you to build IMPERIAL PLAGUE DOCTOR.

 

The figure has 2 options of plague mask head.
Can be assembled with the bird skull staff or with a dread pistol.

 

Out of all the different types of chaos followers that pester the Mankind, the plague acolytes is most commonly encountered and causes the most damage to a planet. A single acolyte can make up to 200 plague sources each day, making contamination of humans and the spread of disease very likely. These persistent creatures may look weak and even dying, but they can have a huge impact on your community.

Chaos Plague acolyte can easily find their way to your planet, squeezing through gaps in planetary defence. We highly recommend contacting a professional PLAGUE DOCTOR at the first sign of activity. At the rate that plague reproduces, a one acolyte issue can quickly turn into a large problem and headache for your rule.
Call PLAGUE DOCTOR today to have all your chaos plague-related problems solved by a professional!

 

HQ resin miniature in 40k Heroic scale with 25mm Scenic base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).

 

PREPARATION

1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.

Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.

2. Casting Gates

The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.

3. Mould Lines

Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.

4. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.

 


  WE NEVER COMPROMISE ON QUALITY

– 8K ultra-high resolution 3D printing with the market-top printers guarantees the highest possible print quality for today;
– The best UV printing resin maximizes the survival of models even after falling off the table;
– Careful manual parts positioning by our experienced specialists provide sharp printing with a minimum of the supports and makes post-processing fun and easy;

 

PREPARATION

1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us at [email protected].

2. Supports & touchpoints

We sell our 3D printed models without any major supports, but you should remove small touchpoints and ultra-tiny supports left on the model.
Please use a model knife and fine sandpaper.
Don’t be intimidated by the process, we use a top-quality UV printing resin and it is very easy to work with.

3. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.

 


 

We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.

Reviews

There are no reviews yet.

Be the first to review “IMPERIAL PLAGUE DOCTOR”

Your email address will not be published. Required fields are marked *

Add to cart