GREATER GOOD DEEP STRIKE VETERAN FAR TAKER

$12.99

– 40k Heroic scale
– 25mm Scenic base
– Sculpted by Grim Skull 

 

SKU: WGX_GG15693 Categories: ,

Description

IMPORTANT! This set allows you to build GREATER GOOD DEEP STRIKE VETERAN FAR TAKER.

 

 

HQ resin miniature in 40k Heroic scale with 25mm Scenic base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).

 

PREPARATION

1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.

Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.

2. Casting Gates

The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.

3. Mould Lines

Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.

4. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.

 


  WE NEVER COMPROMISE ON QUALITY

– 8K ultra-high resolution 3D printing with the market-top printers guarantees the highest possible print quality for today;
– The best UV printing resin maximizes the survival of models even after falling off the table;
– Careful manual parts positioning by our experienced specialists provide sharp printing with a minimum of the supports and makes post-processing fun and easy;

 

PREPARATION

1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us at [email protected].

2. Supports & touchpoints

We sell our 3D printed models without any major supports, but you should remove small touchpoints and ultra-tiny supports left on the model.
Please use a model knife and fine sandpaper.
Don’t be intimidated by the process, we use a top-quality UV printing resin and it is very easy to work with.

3. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.

 


 

We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.

Reviews

  1. cresten87

    Very nice cast, almost no warping and next to no cleaning needed! Forgeworld should pay attention… 5/5 – would order again!

  2. Joseph

    I just ordered two more of these. The model is beautiful i absolutely love it. He looks every part the sniper with a special weapon. He really makes my kill team pop.

  3. Nikolai

    Arrived in half the approximated time.
    Best Resin I’ve ever seen. No Warping and only little cleaning required.
    Highly recommended, will return for more products 😀

  4. Alex

    Résine absolument parfaite, pas de bulles d’air, pas de ligne de moule rien, juste à la nettoyer vite fait au savon et c’est parti pour aller combattre l’imperium. La pose est juste extra !

  5. Mika

    👍🏻

  6. andrewodley123

    Literally made an account to talk about this. Fantastic model and quality. Paint stuck easy. No issue. ONLY thing was that the cable connecting from the backpack to the rifle, and the cape, were too difficult to fit. I didnt bother with them in the end. All others though, very happy. 4/5 stars

  7. JohnB

    A great Killteam model. Amazing detail and no real cleanup needed! could also proxy as a fireblade!

  8. KevinW

    This is a very good mini and relatively easy to paint. Some advice I’d give on this one for people putting it together: Be very careful with trimming the sprues off the cape and be especially careful if you prefer to paint in sub assemblies. The connection point for the cape is very specific and you’ll want to look at the reference images here for guidance.

    The other part as someone else mentioned is the cable. The arms, gun, and cable are separate items that come with the kit and they require alignment to get them attached right.

    FYI I think he is built more like a fire warrior, but he does make a decent sub for a sniper in a pathfinder team. He’s a touch bigger than the Tau infantry and is a little more comparable to the new Dark Strider model from GW.

Add a review

Your email address will not be published. Required fields are marked *

Add to cart