– Primaris scale
– 2 hand options
– 32mm Scenic base
– Sculpted by Grim Skull 


SKU: GMK_240652 Categories: ,


This glorious warrior is armed with a relic sword and armour. He is an excellent master of battle who makes his way through the enemy ranks looking for the hostile that is equal to himself.
Miniature is in primaris scale.
Pay attention that you can assemble this mini with the shield or with the insignia.


IMPORTANT! This set allows you to build IMPERIAL CHAMPION.


HQ resin miniature in Primaris scale with 32mm Scenic base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).



1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.

Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.

2. Casting Gates

The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.

3. Mould Lines

Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.

4. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.



We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.


  1. john

    outstanding quality sculpt

  2. peru.rey

    Excellent sculpt with this product, really love the interpretation with a shield. About 30 minutes to clean up mold lines (hilt of the sword and bottom of the shield mostly). For assembly this really benefitted from pinning, including the rear cloth piece; it glues to the back of the belt and on a flattened portion of the left leg, I put a pin in the leg and drilled a very shallow hole for it in the cloth and this helped dramatically. Shoulder pads needed trimming for the backpack to fit flush in some poses, easily done with a sharp hobby knife.

    Excellent product, would recommend for any Black Templar player.

  3. Kyle Ragland

    Great sculpt, will look great leading by Templars

Add a review

Your email address will not be published. Required fields are marked *

Add to cart