– Primaris scale
– 40mm Scenic base
– Sculpted by Grim Skull 


SKU: GMK_729820 Categories: ,


IMPORTANT! This set allows you to build IMPERIAL BLOOD SMASH CAPTAIN (IH).



HQ resin miniature in 40k Heroic scale with 40mm Scenic base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).



1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.

Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.

2. Casting Gates

The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.

3. Mould Lines

Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.

4. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.



We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.


  1. stevenbarr117

    Amazing looking model. Was originally sent the wrong one, but the site was incredibly nice and sent me a replacement. It’s incredibly detailed and assembles real easy with any model glue.

  2. christian.wakefieldhicks

    Received mine today. Such a beautiful model, assembled really nicely with no hastle or extra work. Looking forward to painting this model up in true death company colours

  3. marvin_dp3

    Just wonderful ! Everything go perfect ! (just careful with the Iron Halo)

  4. krgood9008

    Overall really great model. It is solid resin but still soft enough to work easily with any tools you need. The pieces fit together very well. The wings are a ball and socket joint giving you some flexibility in which angle and tilt you would like to position them in. The model is slightly larger than a standard intercessor primaris marine but not drastically noticeable. It’s weighted well near the bottom so as not to topple over easily on the tabletop. The edges and details are clean and sharp for easy edge highlights. Primer stuck really well to the model and did not pour off like other resins. There were no holes needed to patch and minimal flash to clean. The base is 32 mm to match other HQs. The pieces are positioned well in the pose that I was able to reach most rhinga on the model without needing a sub assembly to do so. I loved painting this model so much i am buying the Chapter master and Smash captain AV as well. These make really great gifts for your wargaming buddies or if you have a friend that just really loves the lore and likes the models. Pieces are easy to kitbash from this set as well. I would really love to see them make an alternate version of GW’s Sanguinor model.

Add a review

Your email address will not be published. Required fields are marked *

Add to cart