– 40k Heroic scale
– 25mm Scenic base
– Sculpted by Grim Skull

SKU: WGX_NC44335 Categories: ,


 IMPORTANT! This set allows you to build NECROCYBORG GRIM REAPER.




HQ resin miniature in 40k Heroic scale with 25mm Scenic base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).



1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.

Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.

2. Casting Gates

The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.

3. Mould Lines

Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.

4. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.



We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.


  1. will

    Amazingly clean and crisply detailed.

  2. Michael

    Very good cast and a eyecatcher in the table

  3. loic

    très belle figurines, reçu en seulement 1 semaines. La qualité des détails est ENORME.

  4. Toby

    I was looking to make my army stand out, and this Boss did the trick. Looks great on the table. Great detail, and fun to paint. Everything was nicely packaged, all parts were nice and clean, barely any flashing. Assembly vary simple.

  5. Alex

    J’ai eu un peu plus de mal à la coller que les autres de chez wargame, mais elle vaut tout de même 5 étoiles. La qualité de la résine ne change pas c’est juste parfait et le niveau de détail et toujours aussi cool, de l’excellent boulot comme toujours 😉

  6. jeffsheplawy117

    Model looks wonderful, great centerpiece for my army. Really makes me want to spring for the “Necrocyborg” female conversions to make an honour guard for her.

Add a review

Your email address will not be published. Required fields are marked *

Add to cart