– 40k Heroic scale
– Sculpted by Grim Skull

SKU: GMK_24437 Categories: ,





HQ resin conversion set for 10 Necron Warriors.
The miniatures require painting and assembly (use cyanoacrylate superglue only).



1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.

Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.

2. Casting Gates

The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.

3. Mould Lines

Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.

4. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.



We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.


  1. ffyllos

    These are excellent models with a superb amount of detail. The size is small, a fraction smaller in width / girth than GW warrior torsos. They are suitable for converting warriors, drivers of a doomscythe/nightscythe (though you’ll need to cut the shoulder pad a little), ghost ark/doomsday ark, and catacombe command barge. They are just about passable for immortals and lychguard, although the proportions aren’t as good and the arms therefore look large on the bodies. They won’t fit praetorians, or any of the multipart GW character kits like CCB lord or overlord with the void reaper.

    Excellent casting, very high quality and look great.

  2. tkhbecker74

    These are excellent swaps for the Warrior torso for standard Necrons.
    A little adjustments, on GW nodels, were needed to kitbash these into Immortals and Deathmarks. Tho I couldn’t get the Cyclops eye to look right

  3. jeremy.c.griffin

    Purchased a 10 pack to fill in the gaps on my warrior army with 5 and used the other five with warrior legs and lychgard bits to make a unit of “wychgard.” I think with minimal tinkering they’ll fit most standard humanoid necrons. They look very small next to classic destroyers. The sculps are fantastic, and having just cracked an Indomitus Box if the push-fit warrior sculpts are a good indication of future warrior bits these ladies should still be a perfect fit. As to replacements for skorpek, they appear to be closer in size than standard destroyers. I’d say they are a bit smallish, but wouldn’t look too odd with a bit of work making some careful snips. They take superglue and magnets well, however I would recommend a superglue hardener as the dissimilar materials are slow on bond.

    Thank you for the fine work WE, will shop again.

  4. o.collins

    The smooth on smooth cast resin used in these is fantastic! So much better than forge world. Very happy with the quality and the sculpt.
    Will definitely buy from WE again.

  5. SquidGangRiseUp

    Absolutely fantastic sculpts and surprisingly durable, even the little “hair” strands that the back have yet to break on me. I’ve kitbashed them comfortably onto warriors, immortals, deathmarks, tomb scythes, a doomscythe… all I need now are some slightly larger ones to fit on a lokhust heavy destroyer lol

Add a review

Your email address will not be published. Required fields are marked *

Add to cart