ORK RECON GROT DRONE

Description

 Reconnaissance is an important thing, in spite of the fact that orks don’t need it but cowardly grots won’t get into a fight, if they are not sure that they may get something. There is nothing more simple than a grot drone. All that is needed for its production is a pump and to eat pretty rough for the stormy work of the stomach. Quite often, grot drones bring grenades in flight because there is nothing better than throwing grenades at the heads of unsuspecting enemies and to detect them detect them from above grot drones use binoculars or a telescope.
Pay attention how well the sculptor displayed a sneering smile on the grot’s muzzle, showed how he barely runs the pump. Just look where the hose is inserted. This is probably the funniest miniature we’ve ever seen.

IMPORTANT! This set allows you to build ORK RECON GROT DRONE.

HQ resin miniature in Primaris scale with 25mm base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).

PREPARATION

1. Check

Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.

Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.

2. Casting Gates

The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.

3. Mould Lines

Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.

4. Warped Parts and Repositioning

Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.

We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.