.svg){kind=icon}
.svg){kind=logo}
Description
IMPORTANT! This set allows you to build CHAOS THUNDERHAMMER SMASH LORD.
HQ resin miniature in 40k Heroic scale with 40mm Scenic base.
The miniatures require painting and assembly (use cyanoacrylate superglue only).
PREPARATION
1. Check
Firstly, check out all the details whether there are no missing or miscast parts.
If you have problems with details – please contact us.
Then, prepare warm water and clean each part with an old toothbrush and a dishwashing liquid to remove any excess mould release agent which may still be on the surface of the parts.
Please leave the parts to soak for a while before scrubbing if they feel very greasy.
We highly recommend not skipping this step!
Any mould release agent left on the model may prevent the primer from adhering to the model.
2. Casting Gates
The casting gates can be removed with a pair of clippers. Use a sanding pad, modelling knife or model file to clean off any excess.
In case gates are too large for the clippers, use a razor saw or piercing saw.
3. Mould Lines
Resin components are cast into silicone moulds that have split lines.
Sometimes, there may be slight lines on the model that shows where the mould joins together.
In that case, you should remove them so that they don’t show up after painting.
Please use a modelling knife or a file to carefully scrape or file away the line.
Then a smooth surface with some fine sandpaper if it’s necessary.
4. Warped Parts and Repositioning
Sometimes thinner parts could be slightly bent or twisted.
You can easily fix that by immersing the piece in hot water or by applying heat from a hairdryer.
The piece should reform to its original shape by itself.
If not, gently twist the piece back into position.
The amount of heat that needs to be applied is often determined by the thickness of the parts. Thicker parts need to be heated for a longer time.
This technique can also be used to bend some parts into shapes and positions to pose models.
We don’t collect any taxes or fees on your behalf, so you may pay the customs fees according to the law of your country while collecting the package.
Allen –
Great model with lots of detail! Thank you for including two options for the Jet pack. Was a blast to assemble and paint.
jblaszczyszyn –
The detail on this model is superb and the two jump-pack options are both superb. It all fits together really well and mine had almost no flash etc to clean off. One big criticism however is the mount, the whole model being suspended above the base by a flimsy little chain with very little contact on the torso. This is going to snap a lot.
hairy-apostate –
Amazing model. A few options in the box and that’s not all.
I actually reposed him to be running forwards with a suitably night lord head swap to accommodate the new pose since he’s now looking upwards quite sharply. Works though and makes him look very aggressive. Looks great for those concerned about glueing the model by the chains which in my case just fly out behind him.
dcadevsetecka1 –
I was pleasantly surprised at the quality of the material, as I have worked with many different types of resin in model kits, and this is easily up there with the top dogs. Not a blemish, bubble, or slip on the whole cast and detail is crisp. I am sure this will be a very fun one to paint.
winkler.vincent29 –
Finished painting this Badboy today and he is Awesome AF. The amount of Detail is Crazy and made it a blast to paint him. Probably the Favorite Model of my Army right now.